5 Things you need to know before using an emergency water well kit

5 Things you need to know before using an emergency water well kit

Are you planning to build a Do-It-Yourself (DIY) private well on your property?

If yes, the Emergency Water Well kit is one of the best options for the task without the need for professional assistance. It includes the vital tools you need, like the hand pump, and you only have to buy a few materials like the PVC pipes.

However, you still have to remember a few crucial points before starting the project. These factors give you a clean water supply and help avoid unnecessary problems while building the well.

5 Points to Remember Before Building a DIY Private Well

Determine if a DIY Private Well Fits Your Situation

DIY water well kits aren’t always suitable because each property has different needs and conditions.

For example, you cannot always use water from a DIY well for human consumption because of contamination risks. However, you can use its water for other household purposes like irrigation and cleaning.

Call a professional contractor if you plan to use the water well for human consumption. They professionally disinfect the well to ensure the water is free from contaminants that could harm your household’s health. Moreover, they help build a water well that can serve your entire home.

Check Local Regulations on Building a Private Well

Local governments have various regulations on building water wells, especially since it concerns health safety. So, make sure you check your local area rules on building private water wells before starting.

Some areas require only professional contractors to build private water wells and don’t allow DIY construction. You must also secure all necessary permits before the project to avoid penalties.

Moreover, know about the regulations on choosing a location. Local and state governments have minimum distance requirements for wells from contaminants like septic systems and waste disposals.

Choose the Correct Location for Your Water Well

Aside from the minimum distance requirements from contaminants, you also have to consider these location factors when building a well.

Depth of the Underground Water

First, you should determine the ideal depth to dig to reach your well groundwater.

It could go up to hundreds of feet deep; you can only dig around 15 to 30ft with a DIY kit.

Aquifer Condition

Aquifers are rock layers holding underground water. You should ensure that the aquifers in your area have sufficient water supply to sustain a new well.

Some aquifers naturally have an insufficient water supply, while older wells could also affect the supply amount.

Land Type

Your area’s land type can also affect the water well construction. While drilling through soft soil is more accessible, you may need professional help to build a private well in a rocky area.

For example, a professional contractor can provide proper equipment to drill through underground rocks.

Underground Utility Lines

The law also requires you to keep a minimum distance away from underground utility lines to avoid damaging them. Keeping this point in mind helps avoid further hassles and penalty fees when you want to drill a well.

You can gather information about these location factors by hiring a land surveyor. You can alternatively visit your state office for your location’s geological survey.

Consult with a Professional Water Well Contractor

Next, verify all the information above by consulting with a professional well driller who can provide helpful advice to proceed with the project, like:

  • Best spot to drill a well on your property
  • Amount of water supply you can expect
  • Proper land preparation steps before drilling
  • Water well construction procedure
  • Well disinfecting procedure

Moreover, they can tell you if you can proceed without professional assistance or if you need to hire a contractor. This decision is vital for building a private well with a clean water supply.

Prepare Your Materials and Tools

Lastly, prepare all the things you need for the project. Be sure you buy a high-quality emergency water well kit since you are going for DIY construction.

You should also know the other materials you need, like PVC pipes and permanent water well pumps. Moreover, consider preparing some concrete to serve as the base around the top of your well.

Quality Emergency Water Well Kit for Your DIY Private Water Well

Building a water well on your property requires intensive research and physical work to get a clean water supply. However, an Emergency Water Well kit will prove very helpful for the job.