How to Increase Water Pressure from a Well: 3 Steps

How to Increase Water Pressure from a Well in 3 Simple Steps

If you have a well and you have problems with water pressure, then you are on the right blog. Today we are going to teach you how to increase water pressure from a well. Our experts will take care of summarizing this process in three simple steps.

When you live outside the city, you live off water from a well. Water services within cities often offer a water pressure of about 60 pounds per square inch, which is much more than most well water systems.

For people new to the country, having a big drop in your well water pressure is a disappointment.

However, while fixing low water pressure in a well water system can be complicated, it is possible. In fact, you should be able to do it yourself. There are a few different reasons why you may have well water pressure problems, so it’s important to find out what’s causing it so you can fix it.

Here are a couple of checks you can do and what to install to solve the well water pressure problems.

What is a water pump and how does it work?

A water pump allows you to obtain water from wells or tanks for domestic use, evacuate dirty water, or transport water from one place to another. But before continuing with the low water pressure well solution, you need to understand what a water pump is and how it works.

First, we must understand what a pump is used for in the home. A water pump is used to increase the pressure within the plumbing system. It adds force to the hydraulic installation to move the liquid from an area of ​​lower pressure or height to another of higher pressure or altitude. In this way, the user experience is improved.

Follow these three steps and learn how to increase water pressure from a well:

  1. Check for clogged pipes
  2. Install a constant pressure system to prevent problems
  3. Adjust the pressure tank to regulate the water

If you want a definitive solution to your water well pressure problems, contact us. You will receive free advice and return home with the best solution.

Follow these 3 low water pressure well solutions:

#1. Check for Clogged Pipes

how to increase water pressure in house with well

Low water pressure could exist because it has clogged the pipes with a build-up of hard water, sediment, or minerals.

In this case, you will have to clean your pipes. Increasing the water pressure will not help, but it could cause damage to the water system when having clogged pipes. Not only that, but you could spend a lot of time and money trying to change the pressure control switch (mentioned below) when that’s not even the problem.

 Therefore, you need to be sure that the low-pressure issue in your water well is not caused by a clogged pipe before trying anything else. Next, check that all faucets and shower heads are also clean and free of build-ups that may be blocking the flow of water. If you have clogged pipes, take the time to clean them.

#2. Install a Constant Pressure System to Prevent Problems

how to increase your water pressure on a well system - Install a Constant Pressure System

If you know that clogged pipes are not a problem for your low water well pressure, and you notice that every time you are running water from more than one tap and the water pressure drops, the solution could be as simple as installing a constant water pressure system.

This will keep your well water pressure constant, even when using more than one tap at a time.

Fortunately, a constant water pressure system is also quite easy to install.

You can install it on the line where the water enters your home, usually in the basement. This can also be used if the height of your building is affecting the water pressure on the upper floors or if the water pressure tank and pump are too far from the point of use of the water.

#3. Adjust the Pressure to Regulate the Water

low water pressure well solution - Adjust the Pressure to Regulate the Water

Another solution is to adjust the pressure tank. Pressure tanks have gauges that will tell you how much pressure is flowing through your pipes. If it is below 40 PSI, you may want to increase it. Just remember not to set it higher than 60 psi because that could cause the water line to break, leak, and switch failure.

To adjust the pressure tank, first turn off the circuit breaker, which supplies power to the well pump. Once done, locate the air fill valve at the top of the pressure tank. This valve is like a tire valve. To find out what psi is currently, attach a tire pressure gauge to get the pressure reading.