Don’t Panic if Your Well Pump Stops Working

Water is essential to our lives, and many rely on wells to get clean and safe drinking water. But well pumps, like any other equipment, require regular maintenance.

But a sudden failure of well pumps can sometimes be frustrating. 

But don’t panic; you can do a few things if your well pump stops working. For example:

• Keep an eye out for leaks in the lines between your well and pump/pump heads.  
• If possible, turn off the power until you resolve the matter so as not to damage any parts unnecessarily.

• Keep your emergency water well kit handy if the pump needs minor repairs. 

Four signs that indicate your well pump needs repair

Having a well pump reduces your dependence on any other water source. So if it stops working, you must repair it immediately to get an interrupted water supply.

Therefore, get ready with your emergency water well kit if your well pump starts showing these symptoms:

• There’s no water when you turn the faucet on.
• You need to keep the well pump running all the time.
• Toppling water flow.
• Low water pressure

Five possible causes of well pump failure

Sometimes the problems with a pump are pretty straightforward to fix. But there are also cases where you may have to replace the entire system. 

Therefore, keeping an eagle’s eye on your pumps and investigating the causes of failure is essential. 

Here are a few reasons that may cause your water pump to stop working:

• There could be a broken water hose connecting the well to the house. 
• A defective check valve at the bottom of the well caused the water line to leak from the well casing. 

• Rust on the connector leads to a broken water line or well casing corrosion leading to a burst hose.

• Motor corrosion, which is why it is better to cover the mother with an air-tight cover. 

• Sand and sediment in the water supply or low water levels. 

So, keep your emergency water well kit ready in case there’s an issue that you can promptly fix.

Three steps to follow when your well pump stops working

Well pumps and tubing can be expensive, especially if you have multiple wells in your yard. 

They can sometimes be challenging to maintain because there’s no way for you to see what’s happening inside physically. To determine the issue, you must completely dismantle your well pump or tubing system. 

However, the good news is that you can resolve most of these issues by following some simple guidelines:

• Check the breaker box to ensure there’s a power supply. 

The first thing to do if your well pump stops working is to check if there is a power supply or not. Check out your circuit breaker panel if there is one nearby (or use an inline circuit tester). 

The next thing that you should do is check the fuse or breaker. You may have a tripped breaker or a blown fuse when the pump stops working. 

You can try resetting the breaker or changing the fuse to check if it’s a minor fault or if it needs professional help.

• Examine your water pressure tank.

Your well pumps water into the water tank, where a diaphragm compresses as water pumps into the tank. This compression creates pressure that moves water through pipes into your home.

Inspect your water tank to check for the cause of damage when your well pump stops working. Your water tank may be waterlogged; it may have low pressure, or you may have a broken diaphragm. 

Call the experts immediately if you notice any abnormalities. 

• Hire the experts. 

If you hear a few clicks even after the pump has ceased operating, it could be because the pump outside the house is probably broken or loose,

It may sometimes be damaged even if you do not hear the clicks. In such cases, contacting a professional is the best thing to do.

Thus, as the pump is an essential part of your water system, you will want a quick solution if it stops working. Emergency water well kits come in handy in such situations. 

But if you notice any major issue you can’t handle, it’s best to get help from experts.  It’s also better to have professionals periodically check the well pump. They’ll check for pressure or low water levels, leaks in the pipe, and if there is dirt in the pump. You can this way thus increase the lifespan of your well pump with regular and proper maintenance.